Untuk tipe pc ini, menggunakan I/o Panel dan kabel switch On/Off berbeda dari umumnya. berikut tampilannya:
Untuk menggunakan kabel-kabel tersebut ke motherboad 3rd party/ umum standard (msi, asus, gigabyte,dkk) perlu dilakukan penyesuaian kabel panelnya, berikut diagramnya:
sumber
Semoga membantu
1. Kabel power ON/OFF
2. Audio Front panel
3. USB
USB FRONT PANEL (yellow connector)
It's a standard internal USB connector, but with two additional ground wires
+----+----+----+----+----+----+
| Bk | Re | Wh | Gn | Bk | |
+----+----+----+----+----+----+
| Bk | Bw | Bl | Yl | Bk |XXX|
+----+----+----+----+----+----+
+----+----+----+----+----+----+
| 1 | 3 | 5 | 7 | 9 | 11 |
+----+----+----+----+----+----+
| 2 | 4 | 6 | 8 | 10 |XXX|
+----+----+----+----+----+----+
1 Black Ground
2 Black Ground
3 Red USB1 Power
4 Brown USB2 Power
5 White USB1 Data -
6 Blue USB2 Data -
7 Green USB1 Data +
8 Yellow USB2 Data +
9 Black Ground
10 Black Ground
11 Not connected
12 Locked (no pin)
You may connect the lenovo front panel into a generic motherboard using only the pins 3 to 12.
Just leave the pins 1 and 2 disconnected.
The pins 1, 2, 9 and 10 are connected to the cable shield. It will work fine.
STANDARD INTERNAL USB CONNECTOR FOR FRONT PANELS:
+---+---+---+---+---+
| 1 | 3 | 5 | 7 | 9 |
+---+---+---+---+---+
| 2 | 4 | 6 | 8 |XXX|
+---+---+---+---+---+
1 USB1 Power
2 USB2 Power
3 USB1 Data -
4 USB2 Data -
5 USB1 Data +
6 USB2 Data +
7 Ground
8 Ground
9 Not connected
10 Locked (no pin)
CARA MEMBUKA PINnya:
gunakan jarum jahit saja bisa, dicongkel plastik kecilnya sampai terbuka keatas, lalu tarik, seperti ini (pelan2 saja)
Semoga membantu
Posting Komentar